Best Fake Swiss Richard Mille RM 027 – RM 27-02 TOURBILLON RAFAEL NADAL Watch Review at


Richard Mille Tourbillon RM 56-01 Sapphire Crystal Limited Edition

nice HUBLOT BIG BANG SANG BLEU copy watches.In the SIHH opening in 2012, RM 056 seconds seconds of the game sapphire limited edition of the five watches in the watch world caused a shock of the waves, pure performance, its movement and the typical finishing and the case is completely sapphire crystal. This watch revolution led Richard Mille to an unparalleled level of design and innovation.

With this technical expertise and determined to continue to challenge the limits of precision watchmaking, Richard Mille created another unique work in 2013: RM 56-01 Sapphire Crystal. The brand used its huge skeleton experience and manufacturing components in sapphire crystal (Al2O3), during which RM 018 «Homage to Boucheron» was obtained, which has a dual chassis,

Through the use of sapphire crystal floor – to support the entire manual trauma of the tourbillon movement – Richard Mille can penetrate as much light as possible into the movement RM56-01, its display time and minutes, power reserve and torque for 11 and 2 o’clock, Function selection indicator at 4 o’clock. Titanium alloy movement center of the ultimate transparency of the pursuit also allows engineers to sapphire crystal for the central bridge and three rounds. The diameter RM56-01 is made of sapphire crystal and titanium, free from temperature changes and wear effects, ensuring superior stability and providing exemplary timing Richard Mille RM 27-02 copy watch


Best Fake Swiss Richard Mille RM 027 - RM 27-01 Tourbillon Rafael Nadal Watch Review


Its three-part case inspired by RM 056, each component front panel, housing strap and rear baffle – are processed and ground from the solid blocks of sapphire crystal. Need to continue for more than 40 days, 24 hours a day processing operations to produce a case. For processing, specialized CNC machines must be purchased specifically for RM 56-01. All components made of sapphire crystal are made from world experts at Stettler in Lyss, Switzerland. This condition, which is perfectly seated on the wrist, is sealed with two O-rings in transparent Nitril, water resistant to 30 meters and is secured to the cap RM56-01 using 24 5-stage titanium spline screws.

Its strap has a concept of transparency to its apogee. The partnership between Biwi SA and Richard Mille makes it possible to develop a material, Aerospacenano®, that uses nanotechnology to achieve unparalleled transparency and strength. The nanostructures in this material have never been used in the manufacturing process and are produced in situ when manufacturing aerospace nano. Its elasticity and water resistance make it silky touch and super comfortable. RM 56-01 wristband alone created a new batch of materials in the field of watchmaking.



Best Replica Richard Mille NEW RM 027 - RM 27-03 TOURBILLON RAFAEL NADAL Watch Review


RM 56-01 Sapphire crystal symbolizes all the expertise of Richard Mille, through the transparency of transparency, showing the caliber. Since the processing of sapphire crystal is a very difficult process, RM 56-01 can only be used in very limited 5 watches.



Best Copy Richard Mille RM 056 2017 NEW RM 056 JEAN TODT 50TH ANNIVERSARY Watch Review


technical details
Model: Tourbillon Richard Mille RM 56-01 Sapphire, limited edition 5 sapphires.

CALIBER RM56-01: Manual winding tourbillon movement with hours, minutes, power reserve instructions, function selector and torque indicator.

Power reserve: Approx. 70 hours (± 10%) is displayed on the left side of the barrel in digital copy PATEK PHILIPPE new watches

main feature
Base, sapphire crystal center bridge and three rounds: the floor has been completely removed, and is supported by the entire movement of large transparent plate instead. Synthetic sapphire crystal The rhombic crystal structure of Al2O3 has a high melting point of 2,303 Kelvins and a linear expansion minimum thermal coefficient (6 x 10-6), providing excellent stability even under extreme conditions. Its wear resistance is eight times the steel. The third round and the bridge is also made of sapphire crystal. The center of the sapphire crystal reinforcement, reinforced the overall construction of the rigidity, while reducing the structure. All parts of RM 56-01 made of sapphire crystal are treated with an anti-glare coating and are rigorously tested to optimize their resistance.

Torque Indicator: Provides information about the spring tension, so that the timing function of the movement can be optimized. Below 53 dNmm, the spring is considered too loose, and at 65 dNmm above, excessive spring tension may adversely affect the operation of the mechanism, otherwise it will actually endanger it. (These instructions appear in the digital area on the right side of the barrel).

Function selector: In a manner similar to an automotive gearbox, the buttons at the center of the crown can easily select the winding, neutral and manual settings. 4 o’clock hand shows the selected function: W (winding) – N (neutral) -H (hand).

Free spring balance and variable inertia: represents the ultimate balance of this round of wheels, in the impact and movement of the assembly and disassembly process to ensure a higher reliability, so as to achieve better timing results over time.



Quickly rotate the barrel (6 hours per run instead of 7.5 hours)
This type of barrel offers the following advantages:
– Cyclic internal mainspring adhesion is significantly reduced, thereby improving performance
– Provide excellent mains curve with ideal power reserve reserve / performance and regular rate.

With a progressive recovery of the barrel ribs: the device allows significant winding gain (approximately 20%), especially at the beginning of the winding. It also contributes to the uniform distribution of the inner tension of the winding.

Modular time setting mechanism for chassis: Provides the following advantages for service life and maintenance:
– Since the component is installed outside of the movement, the time setting component can be changed without affecting the integrity of the backplane or the maintenance period, if possible,
– Installing and removing modules from behind will not require disassembly of the hand and dial.

Improved time setting system (after exercise): The rolling is replaced by rolling friction, and the time setting function is smoother.

Winding gears and three-wheeled pinion and center reel profile: Wheels with central development profile and 20 ° pressure angle are more effective in promoting rolling motion, compensating for differences between centers, ensuring excellent torque transmission and significant performance improvements.

5-level titanium alloy spline screws for bridges: This allows for better control of the torque applied to the screws during assembly. Therefore, these screws are not affected by physical operation during assembly or disassembly and are ZENITH ACADEMY 18.2520.4805/98.C713 copy watch



Buy Replica Richard Mille RM027 Rafael Nadal Watch


Other features
– Movement size: 33.20 mm x 30.90 mm
– Thickness: 5.36 mm
– Tourbillon diameter: 10.90 mm
– Balance wheel diameter: 9.12 mm
– Number of jewelery: 28
– balance wheel: Glucydur, with 2 arms and 4 set screws, moment of inertia 10 mg.cm2,
Lifting angle 53 ° – Frequency: 21,600 vph (3 Hz)
– Balance spring: ELVV N byNivarox®
– torque indicator, dNmm
– Earthquake function: KIF ELASTOR KE 160 B28
– Platinum Diamond
– Nickel-free cylinder Chronifer (DIN X 46 Cr 13 + S), has the following characteristics: Stainless steel – non-magnetic – Tempering

The entire housing – front baffle, housing strap, back RM 56-01 is cut and ground from the sapphire solid block. No external structure is used to support the assembled parts. Sapphire is known as a special scratch resistant material with 1800 Vickers hardness. Made of alumina (Al2O3) crystals, it is transparent due to its molecular structure. The processing of these components is the biggest challenge facing Richard Miller’s watch, and the challenge is getting harder because the sapphire process is very delicate.

Although the sapphire is very strong, but in the milling and cutting process even without the slightest error. To create a case of this quality, after more than 1,000 hours of processing, of which 430 hours for preformed shell components, 350 hours for polishing the entire case. For excellent optical performance, the front and rear baffles have been treated with anti-glare coating. Three-point tank waterproof 30 meters, sealed by the Nitril O-ring to ensure. The housing is assembled with 24L stainless steel 5 grade titanium and 24 spline screws in wear-resistant washers. Size: 50.50 x 42.70 x 16.75 mm.

The No. 5 titanium alloy spline screw is suitable for this situation: This allows for better control of the torque applied to the screw during assembly. Therefore, these screws are not affected by physical operation during assembly or disassembly and are aged.

Flange: In titanium, the black plating process and the index fill the approved luminescent material.
Dial: sapphire (thickness: 0.40 mm), anti-glare treatment (both sides), inserted by 8 silicone bracket into the upper and lower flange troughs.

Bezel and case back
Bezel side: sapphire (1,800 Vickers), anti-glare coating (both sides)
Thickness: 2.50 mm
Case back: sapphire anti-glare coating (on both sides)
Thickness: 2.

The partnership between SA and Richard Mille led to the development of a material that uses the latest nanotechnology to provide unparalleled resistance and transparency: Aerospacenano®. The nano-reinforced properties of this innovative material are produced in their production processes. Its elasticity and natural water resistance make it feel silky and provide the best comfort. RM 56-01 strap has launched a new class of



Leave a Reply