COPY HUBLOT MASTERPIECE MP-06 HIGH JEWELLERY FULL BAGUETTE 906.WX.9000.LR.9904 MEN WATCH at http://www.reviewbestselling.com

replica HUBLOT MASTERPIECE MP-05 LAFERRARI 905.NX.0001.RX watch

 

Richard Mille RM 07-01 and RM 037 in NTPT Carbon with Diamonds

NTPT Carbon is now a unique element in the Richard Mille Men’s Collection. It allows the manufacturer’s watch to have a unique look while at the same time guaranteeing the ideal protection of the internal movement. This material is used today in models for the female public RM 07-01 and RM 037, where NTPT carbon is rich in gemstones and the other is exclusive to Richard Mille. I found the contrast between the sparkling and matt carbon profile of their pure diamonds surprising. NTPT carbon embedding is a completely new adventure. Unlike hand-crafted gold that allows artisans to directly use their tools, seats and jaws to hold the gemstones, the hardness and resistance of the composites means the use of a specific digital control machine created with diamond tools to achieve “pave” embedding. Need a thick drill. The case was on NTPT carbon, diamonds were set on the bezel; the central part of the case was in 5N red gold, satin, and polished towers.

NTPT carbon consists of a set of layers, each consisting of parallel and parallel filaments; layers impregnated with a particular resin with a maximum thickness of 30 microns are overlapped by an automata relative to the previous 45° tilt. At this point the composite was heated in an autoclave to 120°C at a pressure of 6 atmospheres; at the end of the process, it was ready to machine the machine in the CNC work center at Richard Mille, Proart’s chassis manufacturing facility. Due to the two nitrile elastomer rings (O-rings), the waterproof performance of the three-piece waterproof case reaches 5 atmospheres. The parts are assembled using 12 Tier No. 5 titanium splined head screws and a wear-resistant 316L stainless steel washer. Separately produced hand-polished red or grey gold claws are inserted into the 0.25 mm seats, and if the RM 037 full set, they will bear the burden of permanently holding 250 diamonds. The perfectly flat stone surface in each specimen shows the perfect mastery of this goldsmith’s art. CRMA2’s manufacturing aperture is made of a unique combination of materials such as red gold for carrure and white ATZ ceramic for bezel and case back. Resistant to impact and scratches, this is the result of a lengthy process that yields an opaque appearance. 5N gold car satin, the rod is polished. RM 07-01 has white ceramic TZP-Z, white ATZ ceramic, white gold or red gold.luxury replica BOVET Watches price

 

Copy Hublot Masterpiece MP-06 SENNA 906.ND.0110.LR men Watch

 

RICHARD MILLE RM 07-01 automatic lady’s technical features

RM 07-01, has been used in white ceramic ATZ or brown ceramic TZP-Z, the central part of the case is red gold, completely inlaid white or red gold, with a polished bezel or various versions of the dial (on agate, Jasper, Mother of Pearl, etc.) Today, you can also choose the NTPT carbon version with diamonds.

CRMA2 CALIBER: Automatic winding, skeleton movement, with hours, minutes and variable geometry rotor. Dimensions: 45.66 x 31.40 x 11.85 mm.

Self- sovereignty. About 50 hours (±10%).

PLATINA AND TITANIUM BRIDGES GRADE 5. Miniaturized Ti5 Ti with “electroplasma” surface treatment enhances the rigidity of the entire composite and ensures a perfect flatness of the surface, which is essential for the perfect function of the gear train. In addition, these bridges use titanium grade 5, micro treatment and “electroplasma” surface treatment. In order to verify the necessary resistance characteristics, long-term and specific tests were performed on the skeleton plates and bridges.

Variable geometry rotor with diamond shape

– Red gold 5N ceramic ball bearings

– Bidirectional charging mechanism

– OneWay® inverter with ceramic ball

This adjustable geometry rotor can be automatically charged according to the type of activity the owner performs. Adjustments were made by positioning the two outer parts symmetrically along the circumference of the rotor in heavy metal, using two slotted head screws to lock them each. By combining the two parts, the inertia of the system is greater, so that the barrel can be loaded more quickly. Instead, by moving them to the end of the rotor, the inertia decreases and the spring charges more slowly.hot RICHARD MILLE RM 11-02 FLYBACK replica watch

BILANCIERE A VARIABLE INERTIA. This rocker ensures high reliability in the event of impact and when assembling and removing the movement. In the long run, accuracy has improved. The racquet adjustment system eliminates four squeegees and the eccentric mounting is directly attached to the rocker arm, ensuring more accurate and repeatable calibration.

QUICK ROTATION BARREL (in 5 hours instead of 7.5). This type of cartridge allows the following advantages: it occasionally significantly reduces the phenomenon of spring-adhesion to the inner surface, thereby improving the performance and bringing about an excellent “incremental” release of the spring force between the curve and autonomy and regularity Ideal relationship march.

Optimize the development profile of the wheel. All main sprocket wheels of the CRMA2 movement are optimized with a special cutting profile that provides a 20° pressure angle. This angle facilitates rotation and better accepts the difference between the two

Wheel center. This gear system ensures a good transfer of torque to the balance wheel, helping to achieve optimal performance stability.

Grade 5 head screws for titanium alloys are used for sports. This type of head ensures better control of the tightening torque applied during assembly. They wear out better during disassembly and reassembly and do not age.replica BELL & ROSS BRS DIAMOND Replica Watch

CASH. The design and construction of the watch highlights the coordinated design of the entire movement-case. Therefore, according to extremely strict technical specifications, all content is generated in a balanced manner. For example, without an adapter ring, the movement is mounted on a rubber-elastic bracket (ISO SW) and secured with four titanium screws. Features like this are proof of project without compromise.

Patented system charging – CORONA axis. The patented loader crown system completely shields the entire movement from external influences because the corona of RM 07-01 is not connected to the center of the movement. Related to the cashier, it becomes impossible to move and can be easily manipulated by watchmakers. The ideal solution to maintain the life of the mechanism.

Titanium casting grade 5 titanium head screws. Due to their shape, these screws can better control the tightening torque during assembly. They are subject to better wear during disassembly and reassembly operations and do not age.

Internal LUNET. In carbon fibers, there are indicators of approved luminescent materials;

glasses. Bezel side: Sapphire (1,800 Vickers), both sides have anti-reflective coating. Thickness: 1.60mm Bottom side: sapphire, antireflective coating on both sides

Thickness: 0.95 mm in the middle and 1.67 mm in the periphery

RICHARD MILLE RM 037 automatic lady’s technical features

In the case of the RM 037, the white ceramic ATZ or black ceramic TZP-N with the central part of the case with red or white gold has been listed, with various versions of gem embedded, and now you can also choose the NTT low carbon version of the diamond.

CRMA1 CALIBER: Automatic winding, skeleton movement, with hours, minutes, variable geometry rotor, large date and function selector.

Size: 52.63 x 34.40 x 13.00 mm.

Self- sovereignty. About 50 hours. Great day

Placed below 12 o’clock, the semi-real-time date can be read on a digitally rotating white background, culled on two disks. The date can be easily corrected by using the button on the case at 10 o’clock.replica watches for sale

Function selector. The charging function, in setting the time and the crowd’s selection, is a function of displaying the activity by selecting the button on the dial located on the dial in the 4-hour hour indicator: W (Charge) – N (Neutral) – H (remittance per hour).

Escapement: Rubifix (transparent)

CASH. The design and construction of the watch highlights the coordinated design of the entire movement-case. Therefore, according to extremely strict technical specifications, all content is generated in a balanced manner.

The caliber of CRMA1 is made from a unique combination of materials such as red gold for cars and black ceramic TZP-N for the bezel and case back. Resistant to impact and scratches, this is the result of a lengthy process that yields an opaque appearance. 5N gold car satin, the rod is polished. RM 037 has black ceramic TZP-N, white ATZ ceramic, white or red gold.

The case was on NTPT carbon, diamonds were set on the bezel; the central part of the case was in 5N red gold, satin, and polished towers. NTPT carbon consists of a set of layers, each consisting of parallel and parallel filaments; layers impregnated with a particular resin with a maximum thickness of 30 microns are overlapped by an automata relative to the previous 45° tilt. At this point the composite was heated in an autoclave to 120°C at a pressure of 6 atmospheres; at the end of the process, it was ready to machine the machine in the CNC work center at Richard Mille, Proart’s chassis manufacturing facility.

Different from the traditional manual direct operation of the gold, it can create seats for the anchors of the stone. The hardness and resistance of the NTPT carbon requires the use of a special CNC machine tool. The diamond tool can be used for “pave setting” thick diamonds.

Separately crafted red or grey hand-polished golden claws are inserted into the 0.25 mm seat to accommodate 250 diamonds permanently in the “full suit” version. Due to the two nitrile elastomer rings (O-rings), the waterproof performance of the three-piece waterproof case reaches 5 atmospheres. Parts are assembled using 20 Tier 5 titanium splined head screws and wear-resistant 316L stainless steel washers.replica Audemars Piguet ROYAL OAK OFFSHORE watches

Internal LUNET. In carbon fibers, there are indicators of approved luminescent materials.

glasses. Bezel side: Sapphire (1,800 Vickers), both sides have anti-reflective coating. Thickness: 1.60mm Bottom side: sapphire, antireflective coating on both sides

Thickness: middle 0.95 mm, outer 1.66 mm

 

Leave a Reply